Updated CCIN/FRU Table for MCMs (p670) and Memory Cards (p670 and p690). In the drop-down box, choose the entry for your specific machine type and model. The next screen displays a warning that indicates you will not be able to return to the Base OS menu without rebooting. 5. All rights reserved. his comment is here
ADDITIONAL PROBLEM CONFIRMATION ACTIONS: If you have access to the backup logs on the system that created SysBack tape, you could look for this information as well: ......... Customers are strongly encouraged to install this release. b. Now the Migratio n is successfull and thanks all. http://www-01.ibm.com/support/docview.wss?uid=isg3T1000330
You're now being signed in. You will want to verify this update as shown in paragraph 6.4. Fixed TOD code problem.
Improved detection of NVRAM low battery warning. Are you sure there's an OS on the second disk?So boot from CD-Rom and in install menu see if you can find the disk. If so, click on 'Unknown*Frame', then chose Refresh. The other thing is that you could DD the first 512k from hdisk1 and overwrite the first 512k of the hdisk0 if its not booting because the bosboot didn't get run
This lead to erroneous mp_fatal errors and could crash of the system. 3J040326 IMPACT: Function SEVERITY: Attention Corrects a problem where 20D009xx errors were not being reported to the operating system Select the option INSTALL THE SYSTEM WITH CURRENT SETTINGS. If not, change it by running bootlist -m normal cd0 hdisk0 hdisk1" and then reboot. Regards Amit On Tue, 12 Jun Top This thread has been closed due to inactivity.
A problem was fixed that caused the system to hang at E52A when rebooted after SRC B1274634 ("SPCN loop fault") was reported. 3J060917 IMPACT: Serviceability SEVERITY: Special Attention A problem was A problem was fixed that caused the system to hang at E52A when rebooted after SRC B1274634 ("SPCN loop fault") was reported. 3H060917 IMPACT: Serviceability SEVERITY: Special Attention A problem Corrects the FRU callout/priorities for a 406E0001 (scr_clock_stop) errors. Watson Product Search Search None of the above, continue with my search AIX and FIRMWARE LIMITATION CAN PROHIBIT SYSTEM BOOT WHEN KERNEL IS GREATER THAN 12MB AIX tape boot image failure
Corrects location code designation for the Service Processor battery FRU. 3J031118 Corrects power error after a PLD event indicated by 10118731, 10118711 and potential B00E hangs. Resolves an MCM logic condition such that an unwarranted checkstop is prevented. NOTE: If you choose to network boot, you will have to access SMS to enter the bootp information just like you would for a NIM boot. IBM and Tivoli does not support these code packages.
This is NOT an error condition. http://bsnux.com/aix-error/aix-error-code-00c9.html Added callout for L3 UE. Corrects one potential cause of boot failures (with error code 450E25E7 or 4B2E25E9) on systems equipped with 1.7 GHz MCMs. 3H030703 Corrects an erroneous error being reported to AIX during a Please read this entire document before implementing any of its suggestions.
Various enhancement to the microcode on the High-Performance Switch adapter 3H050715 IMPACT: Serviceability SEVERITY: Special Attention Added support for address request protocol (ARP). The System Power Control Network (SPCN) update will continue to run in the background. *** WARNING: Do not power off the target server at any time before the update process completes. Change made to mask interrupts for a specific slot if a problem is encountered with and I/O adapter. weblink The firmware updates for each version will be distinguished by the having the leading number reflect the version.
LPAR2 will only see the available NICs while in SMS mode. If you find the firmware must be updated, proceed to Section 5.0. Corrected FRU isolation error for SRN A03-081.
error. At the AIX command line, enter: sum 3J080425.img The output will look like this -------> 37083 6331 3J080425.img The checksum is ---------------> 37083 6.1 Full System Partition Updating RJ030206 Corrects system hang during boot with bad date/time stamp in AIX banner and 'default catch' message displayed on the console. A mandatory update from Version 1 to Version 2 was implemented in April 2002.
The checkpoints 99FF and 99FD alternately appear while the update is in progress. To create diskettes for transferring files to the intermediate AIX system, skip to paragraph 188.8.131.52. 184.108.40.206 The FTP Transfer Method This method presumes you have ftp access to the target server. NOTE: You may see a frame icon 'Unknown*Frame' that was created during the update. http://bsnux.com/aix-error/aix-error-code-0c46.html Here's Why Members Love Tek-Tips Forums: Talk To Other Members Notification Of Responses To Questions Favorite Forums One Click Access Keyword Search Of All Posts, And More...
Firmware details of the system. #lscfg -vp | grep -p platform Platform Firmware: ROM level ( alterable ) 3F040326 version RS6K System Info Specific.(YL)..V0.1-P1-X1/Y1 physical location : U0.1-P1-X1/Y1. Regards Amit Join this group Popular White Paper On This Topic ERP Overview Comparison Guide 12Replies Best Answer 0 Mark this reply as the best answer?(Choose carefully, this can't be changed) Enhanced scan log dump to collect critical hardware information first. This can take up to 10 minutes.
Cancel Red Flag SubmittedThank you for helping keep Tek-Tips Forums free from inappropriate posts.The Tek-Tips staff will check this out and take appropriate action. Corrects graphical representation of MCM/L3 interposer plug count menu. Note, that if you do this, you may not be able to boot from the disk again. HOW TO PREPARE FOR NETWORK BOOT If the CD / DVD device can not be allocated to the partition or machine that will be recovered.....
Select "Restore profile data from HMC backup" option. a) Provide a directory on the target server to receive the RPM package. Adds the primary I/O book to the FRU list for certain incidents of the A01-011 SRN. 3H031218 Corrects a potential checkstop condition while concurrently replacing a CEC DCA on a system Corrects system from being stuck in calibration (error code 101100CA) during start of IPL.
thread52-1516707 Forum Search FAQs Links MVPs LPAR question. Address any errors and/or defects identified before proceeding with the firmware update. If the Managed System state on the HMC is READY, the update of the firmware is complete. See that the boot image size above is 22251, if that number is greater than 24576 then your bootimage is greater than 12MB and you are experiencing this problem.
This will position the tape to the correct place and skip the boot images already there. 6. Added an error signature for when the SPCN code does not load successfully when the system and service processor firmware is updated. Boot your system from this media and go to the section of this document titled "AFTER BOOTING, HOW TO INSTALL" AFTER BOOTING, HOW TO INSTALL 1. Before updating the firmware, make sure the backup of Profile Data is complete (if running LPAR).
If the AIX or Linux method is chosen, there is a potential of a crash occurring during SPCN and power subsystem code update that runs in the background after the firmware cd /tmp/fwupdate Enter : restore You will be prompted to mount volume 1 on /dev/rfd0 In the drive of the target server, put the AIX backup diskette